Post #1 · Posted at 2014-08-05 02:26:48pm 10.7 years ago
I repair Arcade games and I have a DDR machine 5th mix that thows an error when it is powered up.
The error is:
Cassette error 132
Cassette error (1)
The unit has a system 573 in it. I get error every day when it is powered on. It the unit sits powered on for about an hour, and then reboot the game boots normally.
Any suggestions on how to get the cabnet to boot normally every time?
I have read about modless .iso disks that use the original Konami boot ROM (that I have) and no security cassette. But, I can't locate any of the files with google searches.
The error is:
Cassette error 132
Cassette error (1)
The unit has a system 573 in it. I get error every day when it is powered on. It the unit sits powered on for about an hour, and then reboot the game boots normally.
Any suggestions on how to get the cabnet to boot normally every time?
I have read about modless .iso disks that use the original Konami boot ROM (that I have) and no security cassette. But, I can't locate any of the files with google searches.
Post #2 · Posted at 2014-08-13 04:09:12pm 10.7 years ago
 Siggy12 | |
|---|---|
 |
Member |
| 14 Posts | |
| Not Set | |
| Reg. 2013-05-11 | |
I'm sorry but I can confirm that they exists!!!!! but they are really hard to find because are in private torrent tracker.
Post #3 · Posted at 2014-09-18 07:12:14pm 10.6 years ago
| Quickman | |
|---|---|
 |
Member+ |
| 6,086 Posts | |
 | |
| Reg. 2013-08-17 | |
| "five minute white boy challenge" | |
Quality posting here.
Anyways, this thread will probably help you out; http://zenius-i-vanisher.com/v5.2/viewthread.php?threadid=2825
Anyways, this thread will probably help you out; http://zenius-i-vanisher.com/v5.2/viewthread.php?threadid=2825
Post #4 · Posted at 2014-10-23 06:15:25pm 10.5 years ago
| vinces | |
|---|---|
|
Member |
| 1 Post | |
| Not Set | |
| Reg. 2014-10-23 | |
is there anyway I can get some assistance with the DDR extreme error. It is reading:
cdr bad
hardware error.....reset
just recently had cdr drive replace threw Betson and still encounter the same problem
cdr bad
hardware error.....reset
just recently had cdr drive replace threw Betson and still encounter the same problem
Post #5 · Posted at 2014-10-23 09:04:02pm 10.5 years ago
| StarCreator | |
|---|---|
 |
Member |
| 134 Posts | |
 | |
| Reg. 2012-01-20 | |
If you just changed the drive, you might want to make sure the jumper setting is on MASTER. It won't work if it's on Slave or Cable Select. The error could also be caused by a damaged disc.