Post #1 · Posted at 2013-12-30 12:20:16am 11.5 years ago
 StepModule | |
|---|---|
 |
Member |
| 53 Posts | |
 | |
| Reg. 2013-09-16 | |
| "Mhh kay" | |
Hi, for christmas i got a tournament ddr pad from ddr game, and I need some sensors for it. does anyone know where to buy them?
Post #2 · Posted at 2013-12-30 04:02:47am 11.5 years ago
| BemaniHyper | |
|---|---|
 |
Member+ |
| 1,435 Posts | |
| | |
| Reg. 2013-09-13 | |
Post #3 · Posted at 2013-12-30 05:56:22am 11.5 years ago
| patj | |
|---|---|
 |
Member |
| 8 Posts | |
| | |
| Reg. 2013-12-30 | |
I don't think that ddrgame sells the sensors anymore. It's pretty unlikely that one of the sensors would break though. I would recommend cleaning the sensors and metal contacts. I would also check to make sure that the wires are properly soldered onto the sensors.
Post #4 · Posted at 2013-12-30 09:45:44pm 11.5 years ago
| StepModule | |
|---|---|
|
Member |
| 53 Posts | |
| | |
| Reg. 2013-09-16 | |
| "Mhh kay" | |
Quote: PinkiePieGamer
http://www.youtube.com/watch?v=A_fY9LA_Nas
If the sensors are broken, this is a good video
If the sensors are broken, this is a good video
it doesn't say where you can buy them
Post #5 · Posted at 2014-01-01 01:09:26am 11.5 years ago
| Lukem1999 | |
|---|---|
 |
Member |
| 59 Posts | |
| | |
| Reg. 2013-07-25 | |
I used to own a Tournament pad from DDRGame as well.
The sensors should already be pre-installed in the pad. Most of the pads bought from DDRGame are already pre-built (with the exception of the ones with bars, which you do have to install yourself), so I'm not quite sure if you need to buy separate sensors unless they really need to be fixed or replaced.
If they aren't responsing, I would probably do what patj recommended and do a full checkup on the sensors and parts underneath of the panels.
The sensors should already be pre-installed in the pad. Most of the pads bought from DDRGame are already pre-built (with the exception of the ones with bars, which you do have to install yourself), so I'm not quite sure if you need to buy separate sensors unless they really need to be fixed or replaced.
If they aren't responsing, I would probably do what patj recommended and do a full checkup on the sensors and parts underneath of the panels.