Raising panels on SuperNOVA pads

Hey. Is it a good idea to raise the panels on a DDR SN pad by using double-sided tape and placing them on the metal things that presses the sensors, under the panel?

Thanks.

I'd really appreciate an answer because I'm thinking of doing it myself on the pad in question, since they are recessed. Any opion would help.

No difference between a supernova and any other ddr/itg stage, use one of the guides around and you'll be golden.

---

Cool. Thanks.

I raised the panels on the left side of the pad. We used regular, double-sided tape (something like this: http://www.homedepot.com/h_d1/N-5yc1v/R-202287313/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053), but we didn't take the wrapper off for the top part of the tape, the side that's facing the ceiling. Does it make a difference? Let me know if you didn't understand that.

Also, I looked up this guy: http://www.youtube.com/watch?v=TG67JTDeNnQ

I actually bought that, but other than the owner refusing to take off the previous tape, the panel would stick with the rubber foam tape. Is it better to use a regular double-sided tape, like I did already? I will use the rubber foam ones and use it for an ITG machine.

Yeah, don't take the top off the double-sided tape. You definitely don't want the arrows stuck to the brackets.