Post #1 · Posted at 2011-02-01 10:36:47am 14.4 years ago
 Suko | |
|---|---|
 |
Member |
| 100 Posts | |
 | |
| Reg. 2007-08-11 | |
Hey all. A few years ago I put together this lil' dude.
Worlds smallest In The Groove machine
It took me awhile, but I've finally gotten around to fixing a few small issues I had with the original design and have made it into a printable PNG file.
The image is approx 10" x 15" @ 300dpi. I suggest printing it on a very thick 11x17 cardstock paper so that it will keep its shape after assembly. If you have any questions, please ask, but I think most of you will be able to figure out how to put it together once you get into it.
Enjoy!
Papercraft ITG2 Machine:
http://techno-hut.com/download/Paper-ITG.png
P.S.
For reference, here is the ITG2 and DDR Extreme cabinets I made in Google SketchUp that I used to create this papercraft model.
ITG 2 in SketchUP
DDR Extreme in SketchUp
Original thread on PNWBemani:
http://www.pnwbemani.net/bemani-discussion/itg2-papercraft-cabinet/msg23259/#new
Worlds smallest In The Groove machine
It took me awhile, but I've finally gotten around to fixing a few small issues I had with the original design and have made it into a printable PNG file.
The image is approx 10" x 15" @ 300dpi. I suggest printing it on a very thick 11x17 cardstock paper so that it will keep its shape after assembly. If you have any questions, please ask, but I think most of you will be able to figure out how to put it together once you get into it.
Enjoy!
Papercraft ITG2 Machine:
http://techno-hut.com/download/Paper-ITG.png
P.S.
For reference, here is the ITG2 and DDR Extreme cabinets I made in Google SketchUp that I used to create this papercraft model.
ITG 2 in SketchUP
DDR Extreme in SketchUp
Original thread on PNWBemani:
http://www.pnwbemani.net/bemani-discussion/itg2-papercraft-cabinet/msg23259/#new
Post #2 · Posted at 2011-02-01 11:43:32am 14.4 years ago
| AeronPeryton | |
|---|---|
 |
Member+ |
| 4,338 Posts | |
 | |
| Reg. 2007-03-03 | |
| "Give me a steady beat." | |
Dawwwww~
Post #3 · Posted at 2011-02-01 12:49:06pm 14.4 years ago
| boomba | |
|---|---|
 |
Member |
| 11,692 Posts | |
| Not Set | |
| Reg. 2008-01-19 | |
| "~ The evolution has begun ! ~" | |
Nice one 
Post #4 · Posted at 2011-02-02 02:25:17am 14.4 years ago
| Suko | |
|---|---|
|
Member |
| 100 Posts | |
| | |
| Reg. 2007-08-11 | |
The original was too small. I've reuploaded the file at the correct size. It should print off just right on an 11x17 paper. If you can't find card stock of 11x17, then just print off the different "parts" of the machine on 8.5 x 11 cardstock and assemble it from there.
Good Luck!
Good Luck!
Post #5 · Posted at 2011-02-02 02:32:38am 14.4 years ago
| PanStyle | |
|---|---|
 |
Member |
| 1,056 Posts | |
 | |
| Reg. 2007-07-05 | |
Looks pretty good. Good job, it's so cute !
Post #6 · Posted at 2011-02-02 02:43:09am 14.4 years ago
| agentmargo | |
|---|---|
 |
Member |
| 1,079 Posts | |
| | |
| Reg. 2010-04-24 | |
| "DDR-ing regularly again!~" | |
It's cute, love it!