Logo

Error code DDR Supernova 2 Betson cabinet Please help

Register Log In Back To Forums

Post #1 · Posted at 2018-10-22 06:18:30pm 7 months ago

Offline LickyLicky
LickyLicky Avatar Member
3 Posts
Not Set
Reg. 2010-01-11
Log in to send this user a private message

Last updated: 2018-10-22 06:22pm
Hello,

I booted up my recently bought machine and am greeted with an error code that read "5-1509-0000 FOOT PANEL ERROR".

Does anyone know what could possibly be causing this? I am guessing it has something to do with the pads but I have no idea where to start looking to fix the issue. I have disconnected and reconnect the pads many of times and I still get this message. I have looked all over the internet (including the manual it came with) and have found no reference of this error.


http://i36.photobucket.com/albums/e46/JayReecie228/IMG_0257_1.jpg

Post #2 · Posted at 2018-10-23 04:04:13am 7 months ago

Offline fygar939
fygar939 Avatar Member
260 Posts
United States
Reg. 2011-06-05
Log in to send this user a private messageDiscord: Strobe?Grill#5537
"Bandmeshi in DDR when"

Last updated: 2018-10-23 04:05am
Do you at least have an EXT-IO? It should look like this: http://farm5.static.flickr.com/4017/4271529450_5bbb1d3a7e.jpg

If you do, make sure everything's connected on that.
Rival Code on DDR A: 5141-1787 ( ANKO K )

Post #3 · Posted at 2018-10-23 04:45:14am 7 months ago

Offline LickyLicky
LickyLicky Avatar Member
3 Posts
Not Set
Reg. 2010-01-11
Log in to send this user a private message

Last updated: 2018-10-23 04:46am
Yes I have one of those, but it doesn't have a circuit board under it. Everything is plugged in. I unplugged on replugged everything and to boot again. Same error Sad Here is a picture of it.


http://i36.photobucket.com/albums/e46/JayReecie228/66d434f8-6793-4d7a-8f1d-215c68126b98.jpg

Post #4 · Posted at 2018-10-23 11:41:49am 7 months ago

Offline kralde
kralde Avatar Member
192 Posts
Spain
Reg. 2009-05-28
Log in to send this user a private messageWindows Live Messenger: kralde[at]msn.comFacebookTwitter: kralde92
PlayStation Network: Kralde1Nintendo Network ID: kralde1Steam: kralde

Last updated: 2018-10-23 11:42am
That happened a lot in my local supernova 1 arcade I played the most
The problem was a false contact with the cables between the pads and the cabinet itself. Since I was only a player there at that moment, the only thing we are allowed to do is to move the cables arround a bit to fix the false contact and reboot until it says OK
Hope that helps in any way
Let's D-D-R!
Register Log In Back To Forums

0 User(s) Viewing This Thread (Past 15 Minutes)

©2006-2019 Zenius -I- vanisher.com -5th style- IIPrivacy Policy
Web Server: 2% · Database: 4% · Server Time: 2019-05-23 11:34:53
This page took 0.005 seconds to execute.
Theme: starlight · Language: englishuk
Reset Theme & Language