Logo

Dance Dance Revolution Pad Connectors (System 573)

註冊賬號 登錄 Back To Forums

Post #1 · Posted at 2019-07-14 11:27:09pm 4.7 years ago

Offline geminimanx4
geminimanx4 Avatar Member
3 帖子
Not Set
Reg. 2019-07-13

My first post!

I'm restoring a couple of DDR Extreme cabinets, and have 2 new tubes which I'm making new wiring harnesses for. I'd reuse the old harnesses from inside the tubes, but someone here wants to buy them. Also they're intermittent when players dance on them. I've replaced all of the sensors / plates / interior arrow panel parts, and yet sometimes an arrow will just disconnect entirely. I've set it on test I/O mode and figured out that the position of the tube can cut the response out.

Does anyone know the part numbers or where I can buy matching molex connectors (there are 2 with 12 pins, and 1 with 4 pins. I'm not sure how to post images on here yet) to replace the ones in the connecting tube that runs between the machine and the pads? I've looked on Digikey, Mouser, eBay, and Google; even ordered ones that look similar, but ended up being a different size.

Any help is greatly appreciated!

Post #2 · Posted at 2019-07-14 11:48:03pm 4.7 years ago

Post #3 · Posted at 2019-07-15 08:36:20am 4.7 years ago

Offline geminimanx4
geminimanx4 Avatar Member
3 帖子
Not Set
Reg. 2019-07-13


Last updated: 2019-07-15 08:36am
The tubes I ordered (along with most of the other parts) were from Channelbeat. Unfortunately, they don't include the wiring harnesses with the tubes, nor do they sell them on their own.

I'm also wondering if they would be available through an automotive parts supplier, or if I didn't search properly through one of the major electronics parts websites. There are thousands of connectors out there, but I haven't had any luck with all the ones that look similar online when they arrive. At least I'm currently stocked up for making harnesses for custom projects.

Post #4 · Posted at 2019-08-30 11:44:22am 4.5 years ago

Offline s3phy
s3phy Avatar Member
8 帖子
France
Reg. 2010-07-19


Last updated: 2019-08-30 11:45am
I recall the connectors are AMP UP connectors like in Sega candy cabs? At least some of them are, there may be some Molex also.

Everything you need is there: https://wiki.arcadeotaku.com/w/AMP_Universal_Power
Part numbers for the housing, the pins, where to buy, etc. Smile

Check with the pictures to be sure this is what you're looking for. I don't have a DDR cab to check at the moment Smile And I didn't take pictures of that wiring last time I worked on one.
註冊賬號 登錄 Back To Forums

0 User(s) Viewing This Thread (Past 15 Minutes)

©2006-2024 Zenius -I- vanisher.com -5th style- IIPrivacy Policy
Web Server: 4% · Database: 8% · Server Time: 2024-03-28 15:05:06
This page took 0.004 seconds to execute.
Theme: starlight · Language: chinesetraditional
Reset Theme & Language